High Voltage Power Transformer , 110kV - 25000 KVA , Low Partial Discharge

Basic Information
Place of Origin: China
Brand Name: Pearl Electric
Certification: KEMA, CE, CCC, ISO9001
Model Number: PEO-S, S9~13,SZ11-M,SZ11
Minimum Order Quantity: 1 unit
Price: USD/RMB
Packaging Details: Seaworthy wooden packing
Delivery Time: 45-50days ex-work
Payment Terms: T/T, L/C
Supply Ability: 2.5 Million KVA/Year
Contact Now

 

110kV - 25000kVA , Power Distribution Transformer , Three Phases , Power Transformer , Hight Capacity​

 

Product Advantages


Core:


The core is manufactured with high quality cold rolled grain-oriented silicon steel of high magnetic conductivity, and 45° mitring and steps overlapping structure is used for core production, enable the effectiveness of reducing no-load loss and no-load current.

HV winding:


HV winding is manufactured with high quality copper conductor, adopting optimized structure to improve electric distribution. Lightning impulse wave process is carried out for calculation and analysis, thus to improve transformer's anti-lightning impulse capability.

LVwinding:


LV winding is manufactured with high quality foil conductor, so the ampere-turn balance is excellent and the transverse magnetic flux leakage is low. The anti-short circuit capability is thus greatly improved. Oil conduit is rationally designed in the windings to increase winding's heat dispersion surface, effectively reduce temperature and improve transformer's overload capability.

 

Introduction 

 

By winding number

 

110kV class 3-phase two-winding power transformer

 

By tap-changing

 

110kV class on-load tap-changing power transformer

 

 

110kV class off-load tap-changing power transformer

 

 

Insulation Structure:


The transformer adopts class-A insulation. The HV and LV windings are arranged in concentric way. Between the windings are oil-clapboard insulation structure built with paper cylinder and small oil conduit.

Tank:


The tank conservator tank type with radiator fins. 


Executed Standards:
IEC60076

 

Installation

General installation instructions

The body standby

 

To ensure the gas relay can work properly, the transformer must be horizontally mounted on teh basis, and the gradient of the basis must be less than 1 degree (when transformer’s cover is declining, the base surface should be horizontal).

Transformer with wheels:

 

 

High Voltage Power Transformer , 110kV - 25000 KVA , Low Partial Discharge

 

 

Contact Details
Sandy

Phone Number : 86-020-22626603

WhatsApp : +008618826241798