|Place of Origin:||China|
|Brand Name:||Pearl Electric Co.,Ltd.|
|Certification:||KEMA, CE, CCC, ISO9001|
|Model Number:||PEO-S, S9~13|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||Seaworthy wooden packing|
|Delivery Time:||35~50days ex-work|
|Payment Terms:||T/T, L/C|
|Supply Ability:||8000 units per year|
10-30 kV - 3000kVA , Oil - Immersed Transformer, Three Phases, Two Winding, Power Distribution
Oil-immersed type transformer features low noise, low loss, rational structure, high quality material, scientific design, strict production technology and advanced test method. The product also has the following additional advantages:
1. High mechanic strength, great anti-short circuit capability, excellent anti-lightning impulse capability and high reliability. All these performance indexes rank first in the industry in China.
2. Excellent overload capability, capable of continuously working under 110% rated load.
3. Low loss, energy-saving, economic and maintenance free.
4. Nice appearance, small size, less installation space occupation and low engineering cost.
5. Each performance index and technical specification excels that specified in China GB, international IEC and industrial standards.
6. Hermetically sealed corrugated tank structure is adopted, thus to effectively prevent air corrosion to the oil and prolong service lifetime of the transformer.
The core is manufactured with high quality cold rolled grain-oriented silicon steel of high magnetic conductivity, and 45° Mitring and steps overlapping structure is used for core production, thus to effectively reduce no-load loss and no-load current.
HV winding is manufactured with high quality copper conductor, adopting optimized structure to improve electric distribution. Lightning impulse wave process is carried out for calculation and analysis, thus to improve transformer's anti-lightning impulse capability.
LV winding is manufactured with high quality foil conductor, so the ampere-turn balance is excellent and the transverse magnetic flux leakage is low.
The transformer adopts class-A insulation. The HV and LV windings are arranged in concentric way. Between the windings are oil-clapboard insulation structure built with paper cylinder and small oil conduit.
The tank is jointed with high-quality steel. Rust-removing and phosphorization processes are carried out for the tank surface, then the surface is coated with FVC anti- erosion paint, thus to effectively prevent grease pollution and chemical erosion.
The transformer is equipped with HV & LV bushings, oil drain valve, earthing bolt, lifting board, rating plate, pressure relief valve and other accessories. Transformers of over 800KVA power are equipped with signaling thermometer and gas relay.
Standard tapping ranges
a) All on-load regulated transformers shall have on-load taps from +5 % to -15 % of the HV voltage in 16 equal steps of 1,25 % each.
b) When an off-circuit tap switch is specified, the range shall be +5 % to –5 % of the HV voltage in 4
steps of 2,5 % each.
Zero sequence impedance
Where specified in Schedule A of an enquiry document, the zero sequence impedance of one unit of each rating and type shall be measured as detailed in 5.2 Test by the Manufacturer of this specification.
|I Basic Information|
|1.02||Applicable Standards||IEC 60076|
|1.04||Country of Origin||China|
|II Pearl Electric Performance|
|2.05||Number of phase||Three|
|2.06||Insullation Class||Class A|
|2.08||Tapping Ranging||±2*2.5% on HV side|
|2.13||Load Loss (@75℃)||W||26500|
|2.14||Max. Ambient Temperature||℃||40℃|
|2.15||Top oil temperature rise||K||60|
|2.16||Winding temperature rise||K||65|
|2.17||Impulse Withstand Voltage||(HV/LV)
|2.18||Power Frequency Withstand Voltage||(HV/LV)
|2.19||Rated Duration of Short Circuit||s||2|
|III Materials & Accessories|
|3.01||Core Materials||Silicon Steel Sheet|
|3.02||Winding Materials||Copper conductor/foil|
|3.03||Main Insulation Materials||Mineral Oil|
|3.05||Pressure relief valve||pcs||Yes,with alarm and trip|
|3.06||Gas relay||pcs||Yes,with alarm and trip|
|3.07||HV&LV Cable Box & Extension Busbar||pcs||Yes|
|3.09||Oil thermometer||pcs||Yes,with alarm and trip|
|3.12||Oil Conservator||pcs||Hermetiacally-sealed tank|
|3.14||Cooling device||pcs||Corrugated fins|
|4.02||Total mass(with oil)||kg||6310|
|Capacity:||3000kVA Or Customized||Rated H. V.:||20kv Or Customized|
|Rated L. V.:||0.433kv Or Customized||Vector Group:||Dyn11 Or Customized|
|Impedence:||6% Or Customized||Cooling:||ONAN/ONAF Or Customized|