500kVA Power Distribution Transformer / Oil Type Transformer Impact Resistance

Basic Information
Place of Origin: China
Brand Name: Pearl Electric
Certification: KEMA, CE, CCC, ISO9001
Model Number: PEO-S, S9~13
Minimum Order Quantity: Negotiation
Price: Negotiable
Packaging Details: Seaworthy wooden packing
Delivery Time: 35~50days ex-work
Payment Terms: T/T, L/C
Supply Ability: 8000 units per year
Contact Now

500kVA Power Distribution Transformer / Oil Type Transformer Impact Resistance​

 

Power Distribution Transformer Introduction

 

transformer produced by our company is a fully sealed oil-immersed distribution transformer with amorphous alloy core as the magnetic conducting material.It is an ideal electrical product for environmental protection and energy conservation.

Core:


The core is manufactured with high quality cold rolled grain-oriented silicon steel of high magnetic conductivity, and 45° Mitring and steps overlapping structure is used for core production, thus to effectively reduce no-load loss and no-load current.

HV winding:


HV winding is manufactured with high quality copper conductor, adopting optimized structure to improve electric distribution. Lightning impulse wave process is carried out for calculation and analysis, thus to improve transformer's anti-lightning impulse capability.

LVwinding:


LV winding is manufactured with high quality foil conductor, so the ampere-turn balance is excellent and the transverse magnetic flux leakage is low. The anti-short circuit capability is thus greatly improved. Oil conduit is rationally designed in the windings to increase winding's heat dispersion surface, effectively reduce temperature and improve transformer's overload capability.


Insulation Structure:


The transformer adopts class-A insulation. The HV and LV windings are arranged in concentric way. Between the windings are oil-clapboard insulation structure built with paper cylinder and small oil conduit.


Tank:


The tank is jointed with high-quality steel. Rust-removing and phosphorization processes are carried out for the tank surface, then the surface is coated with FVC anti- erosion paint, thus to effectively prevent grease pollution and chemical erosion. The appearance is nice and harmonic with the environment. The whole structure is easy for installation and maintenance. It can be widely applied in outdoor environment and under harsh conditions.

 

Accessories:


The transformer is equipped with HV & LV bushings, oil drain valve, earthing bolt, lifting board, rating plate, pressure relief valve and other accessories. Transformers of over 800KVA power are equipped with signaling thermometer and gas relay.

 

Bracing of windings

 

All winding insulation shall be processed to ensure that there will be no detrimental shrinkage after assembly.

 

Windings shall be provided with clamping arrangements that will distribute the clamping forces evenly over the ends of the winding. Unless otherwise approved, winding clamping arrangements shall permit adjustment of the pressure and the taking up of shrinkage that may occur in service.

 

The bracing of the windings and connections shall be such that these parts shall safely withstand the cumulative effects of stresses that may occur during handling, transportation, installation and service, including line-to-line and line-to-ground faults.

 

Full details of the winding clamping arrangements, and their adjustment in or out of the tank, together with relevant drawings and values, shall be submitted for approval and shall form part of the transformer manual.

 

Power Distribution Transformer Parameters

 

No. Items Unit Item 1
I Basic Information     
1.01 Type Designation   PEO-S-KVA/HV/LV
1.02 Applicable Standards   IEC 60076
1.03 Manufacturer   Pearl Electric
1.04 Country of Origin   China
II Pearl Electric Performance     
2.01 Rated Power kVA 500
2.02 HV KV 6.6
2.03 LV KV 0.433
2.04 Frequency Hz 50
2.05 Number of phase   Three
2.06 Insullation Class   Class A
2.07 Cooling Method   ONAN
2.08 Tapping Ranging   ±2*2.5% on HV side
2.09 Vector Group   Dyn11
2.10 Noise level dB 60
2.11 Impedance % 4.75
2.12 No-load loss W 4120
2.13 Load Loss (@75℃) W 34110
2.14 Max. Ambient Temperature 40℃
2.15 Top oil temperature rise K 60
2.16 Winding temperature rise K 65
2.17 Impulse Withstand Voltage (HV/LV)
kV
75/0
2.18 Power Frequency Withstand Voltage (HV/LV)
kV
28/3
2.19 Rated Duration of Short Circuit s 2
III Materials & Accessories     
3.01 Core Materials   Silicon Steel Sheet
3.02 Winding Materials   Copper conductor/foil
3.03 Main Insulation Materials   Mineral Oil
3.04 Tap-changer pcs Off-load tap-changer
3.05 Pressure relief valve pcs Yes,with alarm and trip
3.06 Gas relay pcs Yes,with alarm and trip
3.07 HV&LV Cable Box & Extension Busbar pcs Yes
3.08 Bushing pcs Porcelain Bushing
3.09 Oil thermometer pcs Yes,with alarm and trip
3.10 Terminal box pcs Yes
3.11 Oil-level indicator pcs Yes
3.12 Oil Conservator pcs Hermetiacally-sealed tank
3.13 De-hydrating breather pcs N/A
3.14 Cooling device pcs Corrugated fins
3.15 Current Transformer pcs N/A
3.16 Lightning Arrester pcs N/A
3.17 Transformer wheel pcs Yes
IV OTHERS     
4.01 Dimensions (L*W*H) mm 3220*2450*2180
4.02 Total mass(with oil) kg 7320
4.03 Colour   RAL7035

 

 

500kVA Power Distribution Transformer / Oil Type Transformer Impact Resistance

Contact Details
Sandy

Phone Number : 86-020-22626603

WhatsApp : +008618826241798