|Place of Origin:||China|
|Brand Name:||Pearl Electric|
|Certification:||KEMA, CE, CCC, ISO9001|
|Model Number:||PEC-S, SC(B) 9-15|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||Seaworthy wooden packing|
|Delivery Time:||30days-50days ex-work|
|Payment Terms:||T/T, L/C|
|Supply Ability:||9000 units per year|
|Core:||Silicon Steel Sheet||Cooling:||AN Or Customized|
|Capacity:||125KVA Or Customized||Rated H. V.:||6.6Kv Or Customized|
|Rated L. V.:||0.433kv Or Customized||Impedance:||4% Or Customized|
air cooled transformer dry type,
dry cast resin transformers
6.6kV - 125kVA Cast Resin Dry Type Transformer , Three Phases , Two Winding , Power Distribution
1. It can be directly installed at the load center, which is free of maintenance and install conveniently, therefore it has low comprehensive running cost.
2. With high moisture resistance, it runs normally at the moisture and can be put into operation without being dried after outage, with low loss and local discharge capacity.
3. It has small noise, strong short circuit resistance and excellent environmental performance, and can run under severe environmental condition.
4. It is safe, fire-retardant, fireproof and environment-friendly.
The hoisting, tooling and testing equipment is complete. Pearl Electric has passed the ISO9001-2015 international standard quality management system certification. Adopting advanced technology and high quality raw material, with first class equipment and strict processing, SC-series resin casting dry type transformer. All performance indicators of the products have reached the relevant national standards and international standards.
Pearl Electric's products are universally used in different industries, involving power plants, chemicals, construction, mining, metallurgy, rail transportation and so on. We do utmost to meet the needs of various users.
Cast Resin Dry Type Transformer, Low Noise, Low Loss and Low Partial Discharge.
|I Basic Information|
|1||Rated Voltage ratio||kV||10kV / 0.433 kV|
|1.02||Applicable Standards||IEC 60076|
|1.04||Country of Origin||China|
|II Electric Performance|
|2.06||Insullation Class||Class H|
|2.07||Temperature Rise (@40℃ ambient temperature)||K||125K|
|2.14||Load Loss (@120℃)||W||1960|
|2.15||Local Partial discharge||pC||<10PC|
|2.16||Impulse Withstand Voltage (HV/LV)||kV||75/0|
|2.17||Power Frequency Withstand Voltage
|2.18||Rated Duration of Short Circuit||s||2|
|III Materials & Accessories|
|3.01||Core Materials||Silicon Steel Sheet|
|3.02||Winding Materials||Copper conductor/foil|
|3.03||Insulation methods||HV vacuum cast / LV impregnant|
|3.04||Main Insulation Materials||Epoxy Resin|
|3.06||Sensor for Temperature Alarm and Trip||pcs||Yes, contact provided|
Tests shall be done in conformity referring to the manufacture standard as offered in his bid. All tests procedure shall be in accordance with referring standard.
Design tests (type tests):
A type test report in accordance to referring standard must be presented with offer. 5-2 Routine test:
All routine tests must be performed by manufacture, results must be sent to the client before the date of acceptance test (in case of signature of contract).
The acceptance tests will be held at the factory of the supplier. The client reserves the right to be represented at these tests.
control on all line isolators.
GB/T10228 , GB1094.11 , IEC60076-11 , DIN42523