Payment & Shipping Terms:
|Capacity:||2000kVA Or Customized||Rated H. V.:||11kv Or Customized|
|Rated L. V.:||0.433kv Or Customized||Vector Group:||Dyn11 Or Customized|
|Impedence:||4.75% Or Customized||Cooling:||ONAN/ONAF Or Customized|
11kV - 2000kVA , Oil - Immersed Transformer, Three Phases, Two Winding, Power Distribution
Oil-immersed type transformer features low noise, low loss, rational structure, high quality material, scientific design, strict production technology and advanced test method. The product also has the following additional advantages:
1. High mechanic strength, great anti-short circuit capability, excellent anti-lightning impulse capability and high reliability. All these performance indexes rank first in the industry in China.
2. Excellent overload capability, capable of continuously working under 110% rated load.
3. Low loss, energy-saving, economic and maintenance free.
4. Nice appearance, small size, less installation space occupation and low engineering cost.
5. Each performance index and technical specification excels that specified in China GB, international IEC and industrial standards.
6. Hermetically sealed corrugated tank structure is adopted, thus to effectively prevent air corrosion to the oil and prolong service lifetime of the transformer.
The core is manufactured with high quality cold rolled grain-oriented silicon steel of high magnetic conductivity, and 45° Mitring and steps overlapping structure is used for core production, thus to effectively reduce no-load loss and no-load current.
The transformer adopts class-A insulation. The HV and LV windings are arranged in concentric way. Between the windings are oil-clapboard insulation structure built with paper cylinder and small oil conduit.
The tank is jointed with high-quality steel. Rust-removing and phosphorization processes are carried out for the tank surface, then the surface is coated with FVC anti- erosion paint, thus to effectively prevent grease pollution and chemical erosion. The appearance is nice and harmonic with the environment. The whole structure is easy for installation and maintenance. It can be widely applied in outdoor environment and under harsh conditions.
The transformer is equipped with HV & LV bushings, oil drain valve, earthing bolt, lifting board, rating plate, pressure relief valve and other accessories. Transformers of over 800KVA power are equipped with signaling thermometer and gas relay.
Instructions for Operation and Maintenance of Off-circuit Tap-changer with Strip Type
This instruction is the brief introduction of the strip off-circuit tap-changer. The flange and lifting board of it are fixed on the transformer cover, the function for the tap-changer is that we can operate the tap-changer on the transformer cover, by regulating the tap position to realize the voltage regulating of transformer as required. But only after the transformer is cut off from the electrical network, when the transformer is under off-circuit state, could we operate this type of tap-changer.
When you prepare to install a tap-changer , please take down the switch cover , solid nut , regulating gasket , press washer and sealing gasket , then pass the tap-changer body together through the low part of the tank cover , then put on the sealing gasket and the press washer being removed just now , and put on the regulating gaskets , the number of regulating gaskets are according to the thickness of tank cover , then screw up the solid nut and the switch cover.
|I Basic Information|
|1.02||Applicable Standards||IEC 60076|
|1.04||Country of Origin||China|
|II Pearl Electric Performance|
|2.05||Number of phase||Three|
|2.06||Insullation Class||Class A|
|2.08||Tapping Ranging||±2*2.5% on HV side|
|2.13||Load Loss (@75℃)||W||20000|
|2.14||Max. Ambient Temperature||℃||40℃|
|2.15||Top oil temperature rise||K||60|
|2.16||Winding temperature rise||K||65|
|2.17||Impulse Withstand Voltage||(HV/LV)
|2.18||Power Frequency Withstand Voltage||(HV/LV)
|2.19||Rated Duration of Short Circuit||s||2|
|III Materials & Accessories|
|3.01||Core Materials||Silicon Steel Sheet|
|3.02||Winding Materials||Copper conductor/foil|
|3.03||Main Insulation Materials||Mineral Oil|
|3.05||Pressure relief valve||pcs||Yes,with alarm and trip|
|3.06||Gas relay||pcs||Yes,with alarm and trip|
|3.07||HV&LV Cable Box & Extension Busbar||pcs||Yes|
|3.09||Oil thermometer||pcs||Yes,with alarm and trip|
|3.12||Oil Conservator||pcs||Hermetiacally-sealed tank|
|3.14||Cooling device||pcs||Corrugated fins|
|4.02||Total mass(with oil)||kg||4940|
Contact Person: Sandy